Skip to content
Petro

How do I know my tank calibration chart is right?

For owners, station managers · By the Petro team · Last reviewed

The short answer

A calibration chart converts the depth on the dip stick into litres, and if it is wrong every dip is wrong in the same way, so you see a steady gain or loss that no paperwork check explains. The clearest test is a delivery: dip before and after unloading a known quantity, and compare the rise in litres from the chart with the litres delivered, at several fuel levels. If the chart is consistently off, or the tank has been moved, re-laid or replaced, ask your oil company about having the tank recalibrated.

What does a calibration chart actually do?

An underground tank is usually a horizontal cylinder, so each centimetre of depth holds a different number of litres: few at the bottom and the top, many in the middle. The calibration chart, sometimes called the dip chart or tank table, lists the litres for each depth reading for that particular tank.

Because the litres per centimetre are greatest in the middle of the tank, a small error there matters most. On a large tank, one centimetre near the middle can be well over a hundred litres.

What are the signs that a chart is wrong?

  • A steady difference that depends on the level. The tank shows a gain when it is nearly full and a loss when it is low, or the reverse, and the pattern repeats every delivery cycle.
  • Deliveries that never add up. The dip rise after each delivery is consistently more or less than the litres delivered, even when the bowser's compartments are checked full.
  • A difference that started on a date. The losses began after the tank was replaced, moved, re-laid, repaired or had its fill pipe or dip point changed.
  • Two charts in use. Different staff use different copies, or a copy that belongs to another tank of a similar size.
  • Readings that fall between lines. The chart only gives every few centimetres and people guess the litres in between differently.

How can I test the chart myself?

You cannot recalibrate a tank yourself, but you can collect good evidence about whether the chart is right before you ask anyone to.

  1. Make sure you are using the chart for that tank: check the tank number, size and date on the chart, and keep only one copy in use.
  2. At each delivery, stop sales from that tank, dip before unloading, unload, wait for the fuel to settle, and dip again. Convert both dips with the chart.
  3. Compare the chart rise with the litres delivered. Record the result together with the depth before and after.
  4. Repeat over several deliveries that start at different levels: low, half and high. A chart error usually shows up in one band of depths more than others.
  5. Separately, test the pump meters on the tank with a certified measure, so you know the sales side is right before blaming the chart.

What if the chart turns out to be wrong?

Take your delivery records to your oil company's area officer. Tank installation and calibration at dealer stations is usually arranged through the oil company, and they can tell you how recalibration is done for your tank and who carries it out. Until the new chart arrives, keep using the same chart consistently and note the known error, so the daily figures stay comparable.

When the new chart arrives, date it, file the old one away, and expect a one-off change in the book stock when you first convert with it. Record that change as a single adjustment with a note, rather than letting it mix into the daily differences.

How do I avoid chart mistakes in daily use?

  • Keep one laminated copy of each tank's chart next to the dip point, marked clearly with the tank number and fuel.
  • Read the stick to the nearest millimetre or the smallest mark it has, and work out the litres between chart lines in the same simple way every time.
  • Have the conversion checked by a second person, or entered into a system that converts it, rather than done in the head.
  • Use the same dip stick every day; a worn or bent stick or a replaced one changes the readings.

Frequently asked questions

Can a chart become wrong over time?
The chart itself does not change, but the tank can: settling of the ground, a tank that tilts slightly, a repair or a new dip pipe all change what a given depth means. A difference that appears gradually or after works is worth checking.
Does an automatic tank gauge need a calibration chart too?
Yes. A gauge measures the fuel level and converts it to litres using a tank table, so a wrong table gives wrong litres just as a wrong paper chart does. Check it against careful manual dips from time to time.
Is a chart error a real loss of money?
Not directly: the fuel is there, it is just counted wrongly. But it hides real losses inside the error and can lead you to accept short deliveries or blame staff, so it is worth fixing.

How Petro handles this

Petro keeps a dip reading for each tank against its book stock, with the difference shown on every reading and a Dip Reading Overview chart per tank, which is where a chart error shows up as a pattern over time. Each purchase receipt records the litres actually received into the tank you choose, so the delivery side of the comparison is on record.

See fuel operations in Petro

This guide is general information for Sri Lankan fuel stations, written by the Petro team. Figures in examples are made up. For a decision about your own tax or legal position, check with your accountant or the authority named in the sources.

See Petro running on your own numbers.

Tell us how many pumps you run and how you close the day today. We come back with a walkthrough built around your station, not a generic demo tenant.

30 days free · No card needed · A guided demo · Keep everything you enter · Cancel anytime, no charge

No obligation. We reply within one working day.