Skip to content
Petro

Can paperwork mistakes look like fuel loss?

For owners, station managers, accountants · By the Petro team · Last reviewed

The short answer

Yes, and they are the most common cause of a sudden shortage or gain. A delivery entered on the wrong day or into the wrong tank, a pump linked to the wrong tank, test litres recorded wrongly, a mistyped meter reading, or a price change entered before a back-dated delivery can all make the stock look wrong when every litre is accounted for. Check the paperwork before anything physical, and correct the original entry rather than adjusting today's figures.

What does a deliveries mistake look like?

  • On the wrong day. A delivery that arrived yesterday but was entered today makes yesterday look short by the whole load and today look over by the same amount. The two days cancel, but each one on its own looks alarming.
  • In the wrong tank. With two tanks of the same fuel, a load entered into tank 1 that actually went into tank 2 shows as a gain in one and an equal shortage in the other.
  • At the invoice quantity. If the litres actually received were less than the invoice, entering the invoice figure makes the tank look short every day afterwards, and the claim against the supplier is lost.
  • Entered twice, or not at all. A duplicated delivery shows as a large shortage; a missing one as a large gain.

How can the pump records make a tank look wrong?

  • A pump linked to the wrong tank. Its sales are taken from a tank they did not come from. One tank shows a steady gain and the other a steady loss, roughly equal to that pump's sales. This often starts after a pump or tank is changed or renumbered.
  • A mistyped meter reading. One extra or missing digit on a closing reading makes a huge difference that day, and the next shift's opening reading then disagrees with it.
  • A meter reset not recorded. After a repair or a display reset, the old reading carried forward makes the pump appear to have sold far too much or too little.
  • Test litres. Litres tested and poured back but not recorded as tested make the tank look short. Litres recorded as tested but not really poured back hide a real shortage.

How can a price change cause a stock mismatch?

When fuel prices are revised, many stations record the stock in each tank at the time of the change, so the stock can be valued and the sales before and after can be priced separately. If a delivery that arrived before the change is entered afterwards, with a back-dated time, the stock recorded at the price change no longer includes it.

The result is that the next day's opening stock does not equal the previous day's closing stock, or that the stock and its value no longer agree, even though no fuel is missing. The fix is to record deliveries promptly with their actual time, and to enter the price revision only after every delivery before it is in. If it has already happened, correct the records in date order rather than adjusting the stock.

How do I find a paperwork error quickly?

  1. Find the first day the tank's difference jumped or the pattern changed.
  2. On that day, check every delivery against its note and its before and after dips, and check the date and time it was entered.
  3. Check each pump's opening reading against the previous shift's closing, and check which tank each pump is linked to.
  4. Check test litres against what the pumpers did.
  5. Check for any price change around that time, and whether a delivery was entered after it with an earlier time.
  6. Look at the other tanks of the same fuel: an equal and opposite difference points to a wrong-tank entry.

How do I correct it without making things worse?

  • Correct the original entry on its own date. Do not post an adjustment today to cover an error from last week.
  • After correcting, recalculate the book stock for every day after it, since each day's opening depends on the day before.
  • Keep a short note of what was wrong and who corrected it.
  • Post a stock adjustment only for a difference that remains once the records are right, and only after you are satisfied it is a real gain or loss.

Frequently asked questions

Why does a gain need checking if we are not losing fuel?
A gain is almost always an error somewhere: a delivery entered short, a meter reading entered low, or a pump on the wrong tank. It often has a matching loss somewhere else, and it can hide a real shortage.
How do I stop deliveries being entered on the wrong day?
Enter each delivery as soon as it is unloaded, with its actual arrival date and time, and dip before and after it. If a delivery arrives after closing, still record it with its real time.
Should I re-check the pump-to-tank links?
Yes, whenever a pump, nozzle or tank is added, replaced or renumbered, and whenever one tank shows a steady gain while another shows a matching loss.

How Petro handles this

In Petro a purchase receipt takes the date and time the delivery actually arrived, and each dip reading has a Refetch Book Reading button that recalculates the book stock after a late delivery entry, with a changelog of who entered or changed each reading. Each pump is set up with the tank it draws from, an owner can amend a submitted shift and correct a closing reading with the change listed on the shift, and a new pump price applies from its Valid From date so shift invoices use the price valid on the shift date.

See fuel operations in Petro

This guide is general information for Sri Lankan fuel stations, written by the Petro team. Figures in examples are made up. For a decision about your own tax or legal position, check with your accountant or the authority named in the sources.

See Petro running on your own numbers.

Tell us how many pumps you run and how you close the day today. We come back with a walkthrough built around your station, not a generic demo tenant.

30 days free · No card needed · A guided demo · Keep everything you enter · Cancel anytime, no charge

No obligation. We reply within one working day.